Air Conditioner Tune Up

Indoor Unit

1. Replace customer supplied air filter
2. Inspect evaporator coil
3. Clean out trap with brush
4. Lubricate drive blower motor
5. Check and tighten belts if applicable
6. Check amperage draw on motor
7. Inspect drain line for cracks
8. Check for proper operation of the thermostat
9. Turn off humidifier if applicable
10. Inspect secondary pan for leaks or signs of rust
11. Inspect attic ventilator for proper operation
12. Check for proper operation of the thermostat
13. Inspect ductwork and flexible connections for air leaks
14. Ring out all safety devices using multi tester / test pressure switches
15. Inspect all electrical connections inside blower compartment

Outdoor Unit

1. Clear drain holes at bottom of condenser
2. Inspect condenser coil
3. Lubricate condenser fan motor
4. Inspect fan blades
5. Inspect contactor points for wear
6. Clean contactor with electrical cleaner
7. Inspect electrical connections
8. Inspect high voltage storage pack for proper operation
9. Check voltage
10. Check amperage of compressor and fan motor
11. Check refrigerant pressures with gauges
12. Inspect Schrader fittings for leaks

Read more about why maintenance is important. Schedule maintenance service online now or call us at 973-227-3599.